Need some info 1010 crawler loader. The cooler for the reverser is missing, is this a high pressure cooler, or will a automotive trans cooler work. what is the working presssure for the reverser.
Thanks
Keith
1010 loader reverser
1010 loader reverser
Keith
Re: 1010 loader reverser
Early crawlers were an air to oil cooler on the front of the radiator, later were oil to water in the radiator.
About 135 PSI is system pressure, so automotive cooler will work. There are some better quality hyd coolers out there with threaded fitting that may be easier to adapt to.
Lavoy
About 135 PSI is system pressure, so automotive cooler will work. There are some better quality hyd coolers out there with threaded fitting that may be easier to adapt to.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Re: 1010 loader reverser
Was curios on the trans cooler, there is a trans cooler attached to the radiator, but reverser lines are not hooked to it. I will look for another cooler with fittings.
Thanks Lavoy for the info
Thanks Lavoy for the info
Keith
Re: 1010 loader reverser
Someone must have disconnected it in the past.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 119 guests