Hi -
I was wondering if anyone knew if there are cylinder rebuild kits (bucket control cylinders) available for the John Deere Model 91 Loader - Serial #415... I found the parts catalog and the old number for the rebuild kit seems to be: AU 12371 U but I have had no luck locating anything with that number and the John Deere dealership was also at a loss...
My next option is to bring the cylinders to a rebuild shop but I was hoping there may have been an aftermarket kit put together by chance...
Thanks,
Crawly
Model 91 Loader Cylinder Rebuild Kits?
Re: Model 91 Loader Cylinder Rebuild Kits?
Individual parts should be available at any good hyd shop. Take the cylinder apart and take the seals, cups and O-rings with you and they will match them up.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Re: Model 91 Loader Cylinder Rebuild Kits?
Sounds like a plan - thanks Lavoy!
Re: Model 91 Loader Cylinder Rebuild Kits?
At one time I had a kit for one of the cylinders, would have to dig to find it, but if you strike out, let me know.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 55 guests