350 Crawler

Post support questions about your JD350 and newer crawler here
Post Reply
JD350GO
MC crawler
MC crawler
Posts: 3
Joined: Fri Oct 12, 2018 5:24 pm

350 Crawler

Post by JD350GO » Fri Oct 19, 2018 7:41 pm

Anyone, know the best place for parts for a 350 Gas? I've found nothing on the web so far.

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 350 Crawler

Post by Lavoy » Fri Oct 19, 2018 8:09 pm

I sell parts, that is one of the reasons this message board exists. What is it you are looking for?
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

JD350GO
MC crawler
MC crawler
Posts: 3
Joined: Fri Oct 12, 2018 5:24 pm

Re: 350 Crawler

Post by JD350GO » Sat Oct 20, 2018 5:57 pm

Right now I'm just searching for sources to maintain my 350 Loader! I don't need anything right now, but I am new to this crawler and still going over it.
I am looking for parts for the Marvel Schebler carburetor on it though! The crawler runs but needs some TLC to be a really fine unit.

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 350 Crawler

Post by Lavoy » Sun Oct 21, 2018 9:27 am

My e-mail is postmaster@jdcrawlers.com let me know what you need.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

JD350GO
MC crawler
MC crawler
Posts: 3
Joined: Fri Oct 12, 2018 5:24 pm

Re: 350 Crawler

Post by JD350GO » Fri Nov 09, 2018 7:17 pm

Hi Lavoy,
I got your email to my address earlier. Presently I am building new battery cables and am going to rebuild the stater as well.
The hand grip problem may have a solution by using a product called Plasti-Dip. I think I can remove the steering levers and dip them upside
down in a can. It should give a reasonable look similar to factory grips. Also, if you have or know of an electronic ignition for the 135 cid gas I would be interested. Thanks!

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 350 Crawler

Post by Lavoy » Sat Nov 10, 2018 1:29 am

E-mail me the distributor number, and I will do some digging.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 65 guests