bdbundy35 - Dozer Hydraulics

Post support questions about your JD350 and newer crawler here
Post Reply
Jim B
350 crawler
350 crawler
Posts: 2080
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

bdbundy35 - Dozer Hydraulics

Post by Jim B » Tue Mar 19, 2019 9:18 am

bdbundy35,

To get your post away from the 2016 one you posted your issue on (viewtopic.php?f=8&t=10786); I have started this one to continue your problem on. Have you had a chance to look closely at your pump drive as a follow up to the previous posts? Does it have all the splined shafts shown in the parts breakdown or is the engine end smooth like a pipe on the outside? If it looks like a pipe on the engine end, it is possible someone upgraded it to the newer style drive shaft.

Jim B
350 crawler
350 crawler
Posts: 2080
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: bdbundy35 - Dozer Hydraulics

Post by Jim B » Fri Apr 12, 2019 8:03 pm

Saw your post on the earlier thread. So is it working now or still no hydraulics? If working what was the problem/fix?

Post Reply

Who is online

Users browsing this forum: No registered users and 65 guests