Lift cylinder seals..
Lift cylinder seals..
So both my lift rams were leaking at wiper seal... I replaced the seals and the o-ring.. Both side.. When firing it back up any slowly cycling the cylinders it blew both wiper seal out of the Damn cast iron housing! ... Wtf! Is there a trick to this?... The left side I tapped back in and its fine.. The right side was missing a 1/4 of the plastic ring that lays next to the o-ring in the cast cap.. So it's leaking again.. Worse than before Lavoy u got that plastic ring?? I can get the seals local there a national 471737.. Get them at any auto parts store.
Re: Lift cylinder seals..
Not on hand. Check with a local hyd shop, might be a common size.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Re: Lift cylinder seals..
Can you still get reseal kits for angle and tilt cylinders?
Re: Lift cylinder seals..
Out of curiosity only, I must have missed the first of this. What size crawler are you working on? Is this a bulldozer blade or a loader? Or????
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
Re: Lift cylinder seals..
Most kits are obsolete, I have been able to piece together the necessary parts in the past.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Re: Lift cylinder seals..
re..jirving machine..
tis a jd440 6 way blade
tis a jd440 6 way blade
Who is online
Users browsing this forum: No registered users and 85 guests