Injector return line hose size?

Post support questions about your JD350 and newer crawler here
Post Reply
Wgarner1414
40C crawler
40C crawler
Posts: 23
Joined: Sun Apr 06, 2014 6:05 pm
Location: Georgia

Injector return line hose size?

Post by Wgarner1414 » Wed Mar 25, 2020 4:30 pm

Anyone know what size hose is intended to fit the tee on the injector line that returns to the tank? Fitting measure around .200-.210 but not really a standard size. I had a short piece of VW 5mm is hose left over that fits well.

Jim B
350 crawler
350 crawler
Posts: 2080
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: Injector return line hose size?

Post by Jim B » Thu Mar 26, 2020 4:53 am

It looks like the JD part number is R68281 for the bulk hose used to make those fuel return hoses. It says it has an ID of 0.156" (5/32") or 4mm. Any hose used needs to be rated for fuel oil service. Pressure will be minimal as it is an open return to the tank.

Post Reply

Who is online

Users browsing this forum: No registered users and 49 guests