450C rollers
450C rollers
Will rollers off any other crawlers fit our new to us 450? Anyone in western Pa. have a couple laying around?
1959 440 icd 831 loader
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]
Re: 450C rollers
Here is a page from the JD parts catalog to give you an idea. https://partscatalog.deere.com/jdrc/sid ... pgId/66461
Do you have a 450 or a 450C? Do you know how to tell by serial number? It won't matter with the rolls, but will with some parts you might need in the future.
Do you have a 450 or a 450C? Do you know how to tell by serial number? It won't matter with the rolls, but will with some parts you might need in the future.
Re: 450C rollers
450 would be it as far as I know.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Re: 450C rollers
Thanks for the replies. I hate searching for parts. I hate buying parts.
1959 440 icd 831 loader
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]
Re: 450C rollers
have two used lower and one new berco support roller in Armada MI
JIM
JIM
Re: 450C rollers
Have you checked with Wengers in Myerstown, PA?
Re: 450C rollers
jsal, Thanks but no thanks. I've found a couple used ones near by that I'm checking on today.
JIM B, no I haven't. I have heard of them but they never entered my mind. I'll check them out today.
JIM B, no I haven't. I have heard of them but they never entered my mind. I'll check them out today.
1959 440 icd 831 loader
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]
Re: 450C rollers
Good !!
Re: 450C rollers
Struck out at Wengers JIM B.
I picked up four that are in much better shape than ours off Ebay. At least I got to check them out before I bought them. I have plenty of boat anchors already!
I picked up four that are in much better shape than ours off Ebay. At least I got to check them out before I bought them. I have plenty of boat anchors already!
1959 440 icd 831 loader
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]
-
- 430 crawler
- Posts: 60
- Joined: Wed May 29, 2013 11:03 am
- Location: Delta Junction, Alaska
- Stan Disbrow
- 350 crawler
- Posts: 2900
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Re: 450C rollers
Hi,
I have this nifty JD card. They keep the number in the computer at the parts counter. Practically free parts! I just put a regular payment every month until the balance zeros out. Which it actually does once in a blue moon.
Stan
I have this nifty JD card. They keep the number in the computer at the parts counter. Practically free parts! I just put a regular payment every month until the balance zeros out. Which it actually does once in a blue moon.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Re: 450C rollers
I finally had to give in and buy six new ones. OUCH!
1959 440 icd 831 loader
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]
1961 1010 dozer
1983 410B Hoe
450 C Dozer[/color]
Who is online
Users browsing this forum: No registered users and 62 guests