John Deere 420c reverser disassembly
John Deere 420c reverser disassembly
Hi So I am working at dissassembling my late model reverser and I need some advice on how to get the spider out. I have all the pins out, However there has been water setting in it the last 2 years thus freezing it up. How would you recommend me to get it out with out damaging any thing? Thanks in advance
Re: John Deere 420c reverser disassembly
I have had good luck submerging piece like this under water (days-weeks). It has been 20 years since I took a reverser apart. And it was the older gear style. When I don’t want heat to change the structure of the metal, I will be patient and soak in water.
Best regards, Bruce
Best regards, Bruce
Re: John Deere 420c reverser disassembly
I will give that a shot. I kinda doubt that straight water will loosen the rust but I will try.
Re: John Deere 420c reverser disassembly
Water is hands down the best penetrant for rust other than maybe acid.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Re: John Deere 420c reverser disassembly
Ok Thank you I guess I learned something new today!
Who is online
Users browsing this forum: No registered users and 109 guests