Hello all. On my 2010 wheel tractor gas,I got with the engine in pieces, and was apart with some boxes of parts. The only part I'm missing is the throttle control rod (speed control rod) that runs the left side along the water manifold. It would be nice if I had the center to center length before I make one.It attaches the governor linkage bell-crank to the linkage in the console. It seems to be 28" or so.
Anybody got there hood off who could measure it. Would save me a bunch of time.
Paul Morrison
2010 throttle linkage length.
-
- 40C crawler
- Posts: 12
- Joined: Sat Jun 15, 2019 3:43 pm
- Location: Westwen New York State
Re: 2010 throttle linkage length.
Used ones should be readily available from a tractor salvage yard, not worth the hassle of making one.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 145 guests