420c track adjustment nut size....
420c track adjustment nut size....
Does any one know what size the nuts on the track adjuster are? I had to split them to get them off and now I am not sure what size they are...
Re: 420c track adjustment nut size....
rebuilding my rod adjusters as well. Nuts are 1-8 (1 inch/8TPI)
Re: 420c track adjustment nut size....
Thank you very much!!!!
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Re: 420c track adjustment nut size....
Hi: I cleaned and lubed my adjusters when I first bought my machine working on the premise it’s not “if, but when” I’d throw a track.
Anyway, I bought two extra nuts from Tractor Supply, and have them on the outboard side of the adjustment screw. They help keep the threads clean and can be reefed on or cut off if needed to gain room for adjustment.
I made sure that I could move all the nuts on the adjusters by hand, then brought the tracks into correct tension.
My efforts have paid off; no thrown tracks (so far). Best regards.Paul
Anyway, I bought two extra nuts from Tractor Supply, and have them on the outboard side of the adjustment screw. They help keep the threads clean and can be reefed on or cut off if needed to gain room for adjustment.
I made sure that I could move all the nuts on the adjusters by hand, then brought the tracks into correct tension.
My efforts have paid off; no thrown tracks (so far). Best regards.Paul
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Re: 420c track adjustment nut size....
That is my goal as well!!!
Who is online
Users browsing this forum: No registered users and 96 guests