Fan

[Blademaster]

If anyone has a 6 blade fan for a 450C that they would part with, let me know. 4 Rivers wants 325.00 and shipping is about 100.00 from vintage parts warehouse in Milan, IL to the front range. Then I have to drive 3 1/2 hrs to Erie,Co to pick it up. I'm trying to cut a few corners here. Thanks!

[Jim B]

Which 6 blade fan? Best to tell the one you are looking for.

There is one for suction, AT87439, which appears to replace the 4 blade one. It needs a 20" diameter shroud to use it.

A 6 blade blower fan, AT27701 (subs to AT81264 and a round washer 24M7238).

And another 6 blade blower fan, AT64825 used with the bystander noise reduction package.

[Blademaster]

When it warms up a bit I'm going to take this one off and get sn and get more info to replace it. I don't do much outside when its below 0. I have read about the different fans for this tractor, I gave the sn to the parts chick down on the front range and she said it was definitely the fan she has in stock in IL. So now I found a machine shop in Steamboat that says they can straighten this one. Stay tuned. Thanks.