John Deere 350 hydraulic system pressure relief valve o-rings sought

Post support questions about your JD350 and newer crawler here
Post Reply
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11115
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Re: John Deere 350 hydraulic system pressure relief valve o-rings sought

Post by Lavoy » Sun Oct 19, 2025 7:33 pm

I have had pretty fair luck with Seafoam to get moisture out of hyd oil. Heat is also good, but you need the hyd oil hit for half an hour or so.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
briancady413
MC crawler
MC crawler
Posts: 8
Joined: Fri Aug 15, 2025 7:05 am
Location: Colrain, MA, USA

Re: John Deere 350 hydraulic system pressure relief valve o-rings sought

Post by briancady413 » Mon Oct 20, 2025 4:17 pm

Lavoy, thanks for the tip - what's Seafoam? It turns out that this hydraulic oil had foamed, as it became clear after sitting some days.
Top
User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2985
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Re: John Deere 350 hydraulic system pressure relief valve o-rings sought

Post by Stan Disbrow » Tue Oct 21, 2025 8:20 am

Hi,

https://shop.advanceautoparts.com/p/sea ... gKTSfD_BwE

In other auto parts stores as well.

Stan
There's No Such Thing As A Cheap Crawler!

Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (5045D), 2025 3025E
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 15 guests