450C injection pump issues

Post support questions about your JD350 and newer crawler here
User avatar
amos
1010 crawler
1010 crawler
Posts: 360
Joined: Thu Aug 11, 2016 7:29 am
Location: Piney Woods of east Texas

Re: 450C injection pump issues

Post by amos » Mon Jan 15, 2018 9:16 am

tuney443 wrote:
Sat Jan 13, 2018 9:56 am
I believe the official name in my parts book is baffle.I'll have to look at it more closely to explain furthur.

On a related note--it seems on a C model, the turbo is for HP increasing.On my D dozer, it is an altitude compensating turbo which would make sense because it originally came from out West 34 years ago.Thoughts on that?
Hi Tuney,
Any non-computer controlled turbo will increase H.P. More modern computer controlled turbo's can be utilized for altitude adjustment only.
Briefly: a turbo increases amount of air(specifically the amount of oxygen in the available air) introduced into the combustion chamber. With increased available air and correct injectors a larger fuel air mixture is available. More fuel air mixture means more "bang" per cycle. More bang results in more H.P.
Computer controlled turbos actuate when a lowering of O2 in available air is sensed(O2 sensor). Very simply a dump valve is closed and turbo directs more air into the cylinders to compensate for low O2 read.
Amos
Pushin hard or diggin deep life is good.
What's ahead is what matters. What's behind is already done.
A fool of a man is he who doesn't ask questions...
God gave us 2 ears and 1 mouth for a reason...

Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests