6 volt change to 12 volt

General help and support for your Lindeman through 2010 John Deere crawler
User avatar
ddaxe
420 crawler
420 crawler
Posts: 31
Joined: Thu Aug 13, 2015 6:18 pm
Location: Northern Ontario Canada

Re: 6 volt change to 12 volt

Post by ddaxe » Wed Oct 10, 2018 6:11 am

RacinJason wrote:
Tue Jul 24, 2018 5:48 pm
I decided to install the Pertronix Igniter, and the 12 volt Flamethrower I had ordered while back in MA. Voila.

Just curious.. was it just a standard Pertronix igniter you used... or is there a specific one? I've installed one in my 71 Corvette.. and don't miss fiddling with dwell and all that goes with points... as I had 2 sets of "new" points not work... and finally went with Pertronix..and haven't had an issue with the car in the 10 years it's been in there... I would certainly entertain the idea of using one.. as I know how good they work...
Chrome don't getcha Home

User avatar
notmeu
1010 crawler
1010 crawler
Posts: 344
Joined: Wed Dec 28, 2011 2:23 pm
Location: Western PA

Re: 6 volt change to 12 volt

Post by notmeu » Sat Oct 13, 2018 9:27 am

I believe this is the part number I installed on my 420. http://www.jegs.com/i/Pertronix/751/1123/10002/-1

The pertonix part number is 1123 for a negative ground system. It’s been running perfect for years on my 420.
1956 JD420, gearmatic 8a winch, custom 6 way blade and FOPS.

User avatar
ddaxe
420 crawler
420 crawler
Posts: 31
Joined: Thu Aug 13, 2015 6:18 pm
Location: Northern Ontario Canada

Re: 6 volt change to 12 volt

Post by ddaxe » Mon Oct 15, 2018 6:26 am

notmeu wrote:
Sat Oct 13, 2018 9:27 am
I believe this is the part number I installed on my 420. http://www.jegs.com/i/Pertronix/751/1123/10002/-1

The pertonix part number is 1123 for a negative ground system. It’s been running perfect for years on my 420.
Tks for the info.. greatly appreciated...
Chrome don't getcha Home

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests