Hydraulic ripper swap on 450b to 350b

Post support questions about your JD350 and newer crawler here
Post Reply
User avatar
cjman1977
420 crawler
420 crawler
Posts: 25
Joined: Fri Jun 13, 2014 1:48 pm
Location: Youngsville, NC
Contact:

Hydraulic ripper swap on 450b to 350b

Post by cjman1977 » Sat Apr 13, 2019 6:54 am

Does any one know if the hydraulic ripper from a 450B will fit on a 350B Loader? I have the rear brackets for the backhoe on my 350B. I have the auxillary valve and diverter to switch from 4 in 1 bucket to the ripper.
JD 350B w/ 4 in1
JD 4520 Compact Utility
JD 1025R Sub Compact
Cat 303.5 Mini Ex with Bushmaster Brush Cutter
Soilmover Dirt Pan

Jim B
1010 crawler
1010 crawler
Posts: 379
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: Hydraulic ripper swap on 450b to 350b

Post by Jim B » Sun Apr 14, 2019 5:56 am

I don't have hands on knowledge of the swap but it looks like it may fit. Ripper models 3100 and 3110 show as being used on 350Bs and 450Bs. If you can find the model number of the ripper, you can go to the JD parts catalogs (https://jdparts.deere.com/servlet/com.d ... nguage=19 ) on line review the parts for mounting on both and see how you come out with the components you have access to.

User avatar
cjman1977
420 crawler
420 crawler
Posts: 25
Joined: Fri Jun 13, 2014 1:48 pm
Location: Youngsville, NC
Contact:

Re: Hydraulic ripper swap on 450b to 350b

Post by cjman1977 » Sun Apr 14, 2019 3:47 pm

Thanks! I didn't even think of doing that.
JD 350B w/ 4 in1
JD 4520 Compact Utility
JD 1025R Sub Compact
Cat 303.5 Mini Ex with Bushmaster Brush Cutter
Soilmover Dirt Pan

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests