jd 550 trans. removal late 70s or early 80s model

Post support questions about your JD350 and newer crawler here
Post Reply
cw121462
MC crawler
MC crawler
Posts: 1
Joined: Thu Nov 07, 2019 7:21 pm

jd 550 trans. removal late 70s or early 80s model

Post by cw121462 » Thu Nov 07, 2019 9:50 pm

Best way to rmove transmision from jd 550 just a plain 550! Thanks

Jim B
2010 crawler
2010 crawler
Posts: 657
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: jd 550 trans. removal late 70s or early 80s model

Post by Jim B » Sat Nov 09, 2019 5:36 am

Do you have the John Deere Technical Manual # TM1108 for your 550? There are removal procedures in the technical manuals I have for my machines. If you are pulling the transmission and planning on repairing it you will need the manual. You should check with Lavoy (postmaster@jdcrawlers.com) and see if he can get the manual(s) you need. If you don't have the Operator's manual it is # OMT70877.

I think normally the engine is pulled to remove the transmission, but haven't done that operation. There are a few fellows with 550 experience, that post here, who may see this and have more info.

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests