GEARMATIC WINCH PARTS FOR MODEL 8A.

VJW · Post by **VJW** » Tue Dec 26, 2006 4:44 pm

Recently picked up a gearmatic 8A and started taking the control lever assembly apart. Was wondering about part availability as I'm going to need the seals and cups in the lever assembly. Was also wondering if there are any manuals around on one of these. Thanks, Vic

JD430C · Post by **JD430C** » Tue Dec 26, 2006 5:19 pm

u can still get parts for the winch, dont know about the control. i got some back in the spring for a 8a, pm me if u want the number.
andrew

Post by **Lavoy** » Tue Dec 26, 2006 8:01 pm

Vic,
I have some of the cylinder parts, should be able to get more, but have not tried for sure.
Only manual availalbe would be parts manual.
Lavoy

VJW · Post by **VJW** » Wed Dec 27, 2006 5:24 am

Let me know what parts you have and the prices. Both sides of the cylinders have seized pistons and I'll probably damaged them trying to get them out. Was pretty nasty in the control valve when I took it apart. Were is the parts book availiable? Can you still get one from paccarwinch.com?

Post by **Lavoy** » Wed Dec 27, 2006 11:18 am

Paccar may give or sell you one, just contact them to see.
If your pistons are that frozen, you will need complete pistons then?
Lavoy

VJW · Post by **VJW** » Wed Dec 27, 2006 3:09 pm

Yep, I'm going to need both pistons. Paccar is going to fax a copy of a parts manual to me . Thanks again. Vic

Bloodhound · Post by **Bloodhound** » Sun Oct 06, 2013 10:58 pm

Where were you getting the parts for the gearmatic model 8a winch?

gregjo1948 · Post by **gregjo1948** » Mon Oct 07, 2013 7:54 am

If you can't find controller parts,for about $100.00 you can buy 2 new single resevoir master cylinders and fabricate a controller. gregjo1948

Post by **Lavoy** » Mon Oct 07, 2013 8:05 am

I can get kits for both.
Lavoy

Paul Buhler · Post by **Paul Buhler** » Mon Oct 07, 2013 2:32 pm

Vic:
Send me an email and I'll send to a Gearmatic8a/g manual in .pdf It has parts numbers, pictures and specs.
Paul

scampr · Post by **scampr** » Mon Oct 21, 2013 5:20 pm

Sent you a email Paul and thanks..

Paul Buhler · Post by **Paul Buhler** » Mon Oct 21, 2013 10:40 pm

scampr: I replied. Happy wrenching.

scampr · Post by **scampr** » Tue Oct 22, 2013 6:57 pm

Got it and thanks.. the best part is its a buddies project and i get to keep my hands clean... still looking for the sliding 2nd gear for my 440ICD and once i find that will be messy for sure..lol

JDcrawlers Messageboard

GEARMATIC WINCH PARTS FOR MODEL 8A.

GEARMATIC WINCH PARTS FOR MODEL 8A.

Gearmatic winch

Gearmatic

Who is online