9300 backhoe cylinder gland removal

Post support questions about your JD350 and newer crawler here
Post Reply
boaterri
430 crawler
430 crawler
Posts: 73
Joined: Sat Oct 02, 2010 11:14 am
Location: Florida

9300 backhoe cylinder gland removal

Post by boaterri » Wed Dec 21, 2016 7:30 pm

Looks like I will be rebuilding the curl cylinder on my new old backhoe attachment. The JD parts book calls for a specific gland nut removal tool. I have had no luck finding one on line.

If the original tool is no longer available, what is the preferred tool? Also, where is the best (most reasonably priced) place to find rebuild kits?


Thanks,

Rick

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Wed Dec 21, 2016 7:55 pm

24"pipe wrench works well
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

User avatar
jsal
1010 crawler
1010 crawler
Posts: 363
Joined: Sun Oct 28, 2012 6:27 pm
Location: armada Michigan

Post by jsal » Thu Dec 22, 2016 3:12 am

Large hammer with with a piece of square steel or very large chisel works for me

JIM

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Post by gregjo1948 » Thu Dec 22, 2016 4:48 am

Search "gland wrench" on line.
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

boaterri
430 crawler
430 crawler
Posts: 73
Joined: Sat Oct 02, 2010 11:14 am
Location: Florida

Post by boaterri » Fri Dec 23, 2016 8:05 am

Thanks to all that replied. I have seen the gland wrenches on Google. They seem to be intended for holes in the face of the but. My gland nut has 4 slots in the edge. I did not know if those wrenches were the most appropriate for that style.

Rick

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Fri Dec 23, 2016 11:07 am

2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

boaterri
430 crawler
430 crawler
Posts: 73
Joined: Sat Oct 02, 2010 11:14 am
Location: Florida

Post by boaterri » Fri Dec 23, 2016 1:38 pm

Thank you! Just the information I was looking for.

Rick

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Post by gregjo1948 » Sat Dec 24, 2016 5:06 am

Go on ebay and under "gland nut wrench".
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests