Video of MC Plowing and Discing on youtube

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
catmatt
40C crawler
40C crawler
Posts: 24
Joined: Wed Apr 04, 2007 6:48 pm
Location: Pennsylvania

Video of MC Plowing and Discing on youtube

Post by catmatt » Sun Mar 30, 2008 8:53 pm

Took these vids this weekend! Enjoy!

Plowing http://www.youtube.com/watch?v=dhqkP1NF-xI
Discing http://www.youtube.com/watch?v=PWmghx0muc0

Matt
Top
mini kahuna
1010 crawler
1010 crawler
Posts: 301
Joined: Tue Oct 02, 2007 1:08 pm
Location: rhode island

mc

Post by mini kahuna » Wed Apr 02, 2008 2:05 pm

gotta love that sound,thanks for the link.
1010 loader
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Wed Apr 02, 2008 3:33 pm

I saw that on youtube, figured it might be somebody from here.
Lavoy
Top
User avatar
Bret4207
440 crawler
440 crawler
Posts: 169
Joined: Fri Apr 28, 2006 6:10 pm
Location: St Lawrence Valley NY

Post by Bret4207 » Fri Apr 04, 2008 4:32 pm

His plow wasn't in the ground hardly. He needs some help setting it or he's just wasting gas.

Saw a few other 40C videos there. Most all seem to run the tracks a lot tighter than I do. Must like replacing bearings.
Top
catmatt
40C crawler
40C crawler
Posts: 24
Joined: Wed Apr 04, 2007 6:48 pm
Location: Pennsylvania

Post by catmatt » Tue Apr 08, 2008 4:23 pm

Well I know how to set the plow, it is just worn out and the ground was already getting hard. You are right as I was wasting gas, as the farmer that plants this field actually No-tills the corn. Just a yearly work out for the crawler! As for track Tension, I adjust them just as I would my caterpillar equipment. Depending on conditions, you have to adjust your tracks differently, ie working in clay, mud, snow, rock, etc.
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 10 guests