leakey reverser

john lewis · Post by **john lewis** » Thu Oct 23, 2008 11:20 am

Hi glad to say old girl working pretty good she pushed 69 loads of clay and didnt seem to mind.But i got a crack in reverser on other side of shaft hard to get to and im wondering if i dont use reverser would it hurt to run it dry, right now i keep it wrapped in diappers but they keep coming off. I also thought about putting grease in there,and continue to use reverser,looking for whatever advice i can get.I think i read somewhere and i cant seem to find it now reverser switched to driveshaft with nut or something,starting to get cold here so i would like to wait for summer to pull her apart thanks john

Post by **Lavoy** » Thu Oct 23, 2008 1:17 pm

The reverser must have oil in it whether used or not.
Lavoy

john lewis · Post by **john lewis** » Thu Oct 23, 2008 1:40 pm

could i get by with a light grease for winter

Post by **Lavoy** » Fri Oct 24, 2008 8:43 am

No, it will not lube the small needle bearings that are in the reverser.
Lavoy

JDcrawlers Messageboard

leakey reverser

leakey reverser

Who is online