Got to meet Terry Briggs in Reidfield Maine today. Very friendly guy and more than willing to help. Only deals in 2 cyl. JD dozers. Some MC parts but anything you will need for any up to a 440. Has at least 20 parted out machines. Bought two used 440 rolls for $75 each.
For anyone looking for two bolt pads he has hundreds of them.
He also pins and bushes tracks.
Used Parts guy in Maine.
- Willyr
- 2010 crawler
- Posts: 695
- Joined: Sat Jul 17, 2010 3:03 am
- Location: Downeast Maine (North of Ellsworth)
Phone number would be helpful, web address if any, physicl address, and you sure that isnt Readfield?
former owner of a 1956 420c
All help is greatly appreciated.
Proud owner of a project 1952 JD 60
http://www.youtube.com/watch?v=nFehqXVd9z4
All help is greatly appreciated.
Proud owner of a project 1952 JD 60
http://www.youtube.com/watch?v=nFehqXVd9z4
- JD440ICD2006
- 350 crawler
- Posts: 1113
- Joined: Tue Aug 22, 2006 3:57 pm
- Location: South Carolina
Do you know where he gets his pins and bushings for two bolt tracks? I thought they were all but gone in supply, at least at a reasonable price that made sense.
Does he have almost new or NOS tracks or are they worn out like many of them?
Does he have almost new or NOS tracks or are they worn out like many of them?
1959 JD 440ICD w/64 Power Angle Tilt Blade
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
readfield Me. parts
Terry Briggs
207-458-2651
Not sure on the pins and bushings.He just finished a set a customer that located them in Maine??
Dave
207-458-2651
Not sure on the pins and bushings.He just finished a set a customer that located them in Maine??
Dave
- RacinJason
- 430 crawler
- Posts: 72
- Joined: Wed Aug 29, 2012 6:41 am
- Location: Spfld, MA/ Corinth, ME
40c tracks
Well, this is an old thread, but I see willyr is still around. I'd like to know if Terry Briggs is still working with "Johnny Poppers"? I've been looking for someone with a track press in this neck of the woods. My 40C is in Corinth, ME, tho I live in MA. (unfortunately) Lavoy is too far away, so I'm trying to find someone still doing these old tracks. Pins and bushings are still available from Deere. (DEC2012)
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Hi: Take a look at this thread for a possible option. Good luck. Paul
http://www.jdcrawlers.com/messageboard/ ... ns&start=0
http://www.jdcrawlers.com/messageboard/ ... ns&start=0
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Who is online
Users browsing this forum: No registered users and 141 guests