Roosa-Master pump bench tested..

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
royboy
420 crawler
420 crawler
Posts: 28
Joined: Mon Apr 20, 2009 6:01 pm
Location: Fort Madison, Iowa

Roosa-Master pump bench tested..

Post by royboy » Tue Oct 09, 2012 10:53 am

Any ideas on where to get a injection pump bench tested and how much it cost????

Thanks,

royboy

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Roosa-Master bench test

Post by gregjo1948 » Fri Oct 12, 2012 6:11 am

If you don't have a dedicated pump shop, try truck stops,truck dealers, tractor dealers, and etc. . Greg
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

royboy
420 crawler
420 crawler
Posts: 28
Joined: Mon Apr 20, 2009 6:01 pm
Location: Fort Madison, Iowa

Post by royboy » Fri Oct 12, 2012 6:18 am

thanks,

User avatar
Paul Buhler
350 crawler
350 crawler
Posts: 991
Joined: Wed May 21, 2008 6:25 pm
Location: Killington, VT

Post by Paul Buhler » Fri Oct 12, 2012 9:20 am

Give these guys a call - they may be able to help you or help find someone closer to you.

Good luck

Burlington Diesel Pump Repair
559 Industrial Avenue, Williston, VT
(802) 864-4880 ‎
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch

royboy
420 crawler
420 crawler
Posts: 28
Joined: Mon Apr 20, 2009 6:01 pm
Location: Fort Madison, Iowa

Post by royboy » Fri Oct 12, 2012 7:26 pm

Thanks for all the help...

royboy

jdemaris

Re: Roosa-Master pump bench tested..

Post by jdemaris » Tue Oct 16, 2012 3:00 pm

royboy wrote:Any ideas on where to get a injection pump bench tested and how much it cost????

Thanks,

royboy
In any pump shop I worked in - it was standard policy to never mount anyone's pump on the test stand unless we had it apart first (and worked on it). Many consider it too risky to install a pump in unknown condition on a very expensive test bench. It's also takes a bit of labor. Half the time spent in pump repair is mounting on the stand and testing.

Some tests you can do yourself pretty easy. What exactly are you trying to find out? If it's injecting, timing advance?

Post Reply

Who is online

Users browsing this forum: No registered users and 59 guests