Help, I need a part for my 420

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
panhead
40C crawler
40C crawler
Posts: 21
Joined: Sun Apr 30, 2006 8:31 am
Location: minnesota

Help, I need a part for my 420

Post by panhead » Thu Feb 14, 2013 2:55 pm

Finally got the 420 tore, in half.
Got the clutch fixed, I actually have freeplay at the pedal. One of the clutch finger's was also cracked.
Slipped the engine back on today, and am putting it back together. Hope it move's when I'm done. LOL
I could use a few part's.
I need one of the stud's/nut's, that mounts to the front of the engine, and holds the front casting to the block. Stripped big time, the block hole is good.
I need one of the metal hydrulic line's that goes over the bell housing. Mine's useable, but brazed in a few place's.
I could use a couple of those nut's that go on the tension bolt for the track's.
If you can help me out, shoot me a pm, with what you have, and the price?
Thanks
Jim

Post Reply

Who is online

Users browsing this forum: No registered users and 48 guests