I am wanting to find out whether you can still get 'Throw Out Bearings' for the steering clutches for BO Lindeman Crawler.
Any bearing numbers you can supply me with and availability of the bearings and where I where I can source them from would be appreciated.
I am in Australia and am struggling to find new ones.
bo lindeman
There was just a thread on this a little while ago. I will be on the road for the next 14 hours, but someone on here should know the info, or can point you to the post. I will be back in a week, but no problem sending you a bearing once we know the number.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
http://www.jdcrawlers.com/messageboard/ ... ight=throw ....look at this for that bearing
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
1946 bo lindeman
Thanks lavoy. Wot numbers would you like. Part number of bearing or serial number of bo crawler or bearing dimensions because i have no part numbers for bearings only the lindemans part number te""" thank you for your help.
Look at the link in the post above yours, that will explain a lot of it.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Let me check with my suppliers and see what I can come up with. Send me an e-mail at postmaster@jdcrawlers.com and I will get back to you with availability.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 46 guests