Installing 1010 master link pin

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
stmftr395
440 crawler
440 crawler
Posts: 104
Joined: Mon Dec 11, 2006 10:21 am
Location: Western N.Y.

Installing 1010 master link pin

Post by stmftr395 » Sat Apr 13, 2013 5:28 pm

I have got a pin all but 5/16" or so in place in the link. Heres my issue. The flats on the pin are not exactly lined up with the flats on the link. Have tried to turn the pin. No such luck. Any body got any ideas? Your help will be greatly appreciated! Mark
1010 crawler

User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Sat Apr 13, 2013 5:31 pm

drive it back out a little while someone else has a pipe wrench on it turning it when it is lined up drive it back in
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper

stmftr395
440 crawler
440 crawler
Posts: 104
Joined: Mon Dec 11, 2006 10:21 am
Location: Western N.Y.

Post by stmftr395 » Sat Apr 13, 2013 6:19 pm

Ok JT will give it a try. Kinda thought that might be an option, but was not sure. Thanks
1010 crawler

stmftr395
440 crawler
440 crawler
Posts: 104
Joined: Mon Dec 11, 2006 10:21 am
Location: Western N.Y.

Post by stmftr395 » Sun Apr 14, 2013 7:27 pm

One done one more to go. Thanks for the help JT.
1010 crawler

Post Reply

Who is online

Users browsing this forum: No registered users and 51 guests