#61 blade questions on a 40C

Post by **JD40c** » Sun May 05, 2013 8:39 pm

Finally getting off my butt and putting the #61 blade on my 40C, replacing the #76 blade that was on it.

I have the full belly pan setup and it would seem that the long bar that goes from the front frame cross bar up to the front tow/pull lug gets in the way of the crossbar lift arm for the blade.

Can anyone confirm that the tow lug isn't compatible with the #61 blade?

There won't be much clearance for the front belly pan either, but I think it'll fit.

57jd420 · Post by **57jd420** » Sun May 05, 2013 8:43 pm

look at my posts, theres one from a few weeks ago about the #61 blade. another member posted a link for a downloadable copy of the manual for the blade. hope this may help.

Post by **JD40c** » Sun May 05, 2013 9:01 pm

I have the parts list already. It doesn't say anything about other parts on the crawler.

Post by **Lavoy** » Sun May 05, 2013 10:01 pm

Never thought of it til you mention it, but it does seem like it won't fit.
Lavoy

Post by **JD40c** » Mon May 06, 2013 8:07 pm

Do you have the long heavy metal bar/strap that runs back to the front cross-bar though?

Post by **JD40c** » Thu May 09, 2013 7:31 pm

Cool. Hopefully it'll fit the same for me. I'm waiting on a couple parts before bolting the blade frame to the crawler frame.

Post by **JD40c** » Mon May 20, 2013 11:22 pm

Yep. The bar did indeed fit.

JDcrawlers Messageboard

#61 blade questions on a 40C

#61 blade questions on a 40C

Who is online