1010 crawler rpm setting

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
tcason66
40C crawler
40C crawler
Posts: 21
Joined: Wed Aug 25, 2010 11:43 am
Location: Northeast PA

1010 crawler rpm setting

Post by tcason66 » Mon Jun 10, 2013 12:05 pm

When I am using my backhoe, what RPM should I set the throttle at?
Top
User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Mon Jun 10, 2013 10:08 pm

about 1800/2000 range
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Top
JWB Contracting
2010 crawler
2010 crawler
Posts: 597
Joined: Thu Aug 27, 2009 10:08 pm
Location: Edmonton, Alberta

Maximum hoe usage

Post by JWB Contracting » Mon Jun 10, 2013 10:50 pm

These old hoes can get fairly loose, so probably as much RPM as you can handle. Well, I've never actually ran a hoe on a 1010. My dad has 3 of the old day 1 attachments piled up that he won't let me sell. Guess I'm going to have to assembly one and see how they dig.

We set our reliefs high enough so we're just able to move the crawler around on our 350's. Something to consider vs. running your engine at a higher RPMs. You may want to put a gauge on if your not sure how to make this adjustment. We normally back off on the pressure and then turn it up slowly until we are happy with the operation.
Jason Benesch

John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 53 guests