49 mc

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
Dave Auger
40C crawler
40C crawler
Posts: 11
Joined: Mon Nov 05, 2012 6:23 pm
Location: MARLBORO MA

49 mc

Post by Dave Auger » Fri Jul 19, 2013 11:33 am

seem's I have to adjust the left band brake on the Mc but can't get on it, linkage is in the way, do I have to pull the f-drive off ?
Top
User avatar
mapaduke@yahoo.com
1010 crawler
1010 crawler
Posts: 420
Joined: Sun Sep 13, 2009 6:27 pm
Location: Rochester N.H.

Post by mapaduke@yahoo.com » Sat Jul 20, 2013 6:42 pm

I believe you can use a Crow foot tool on it to loosen the bolt. I would duct tape it to the extension. Don't want to lose in there.
nothing crawles like a deere
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10942
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Sun Jul 21, 2013 10:57 am

Brake adjustment is from the top, half inch wrench and screwdriver if you do both. Underneath is clutch adjustment, and yes, they are a pain. I buy cheap 1/2" box end wrenches, cut the ends off and weld them to a piece of rod you can bend to whatever shape is necessary.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
User avatar
Dave Auger
40C crawler
40C crawler
Posts: 11
Joined: Mon Nov 05, 2012 6:23 pm
Location: MARLBORO MA

mc band adjustmint

Post by Dave Auger » Mon Jul 22, 2013 2:24 pm

Thank's for all the info, we'll give it a try!!
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 21 guests