Finals

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Finals

Post by gregjo1948 » Tue Sep 10, 2013 11:23 am

Will the final drive housing interchange between the 440 and the 1010? Thanks gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Tue Sep 10, 2013 10:38 pm

Don't have any info on the 1010 but 440IC up to s/n 456801 use p/n AT17724T (Housing, final drive [T19406T]) and after s/n 456802 use AT17725T (Housing,final drive [T19407T]). If this helps any?
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Tue Sep 10, 2013 10:41 pm

I don't know what is going on but I have been double posting on YT for a couple of weeks now it looks like it is spreading to here also. The edits never double-post for some reason.
Bryce
Last edited by shinnery on Wed Sep 11, 2013 7:37 pm, edited 2 times in total.
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Finals

Post by gregjo1948 » Wed Sep 11, 2013 6:08 am

Thanks shinnery--- I can check my 1010 parts manual to see what the part number is for 1010 final and compare. gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10947
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Wed Sep 11, 2013 7:59 am

They are not the same, got one of each on the floor as far as the case itself. Internals are also different for the most part, but externally they look similar.
I am referring to the very late 440 housing in this instance, if you are working on the earlier housing, no comparison at all.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Finals

Post by gregjo1948 » Thu Sep 12, 2013 4:28 pm

Thanks Levoy--Looking to maybe pick up a 440 but it has a bad final. Think I better find a final first, before making an offer. gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10947
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Thu Sep 12, 2013 7:15 pm

I think I have both early and late final cases on hand.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
gregjo1948
350 crawler
350 crawler
Posts: 1000
Joined: Mon Aug 30, 2010 5:58 am
Location: Newark Valley,NY,USA

Finals

Post by gregjo1948 » Sat Sep 14, 2013 8:05 am

Thanks Lavoy-- I don't think I could afford to have them shipped to me in upstate NY. You can shoot me a price and meanwhile I'm searching within a driving distance for a good used one. gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10947
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Sat Sep 14, 2013 8:33 am

Freight on an empty case, I would guess in the $80 range.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: No registered users and 84 guests