420 tracks

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
bighoss94
MC crawler
MC crawler
Posts: 4
Joined: Sat Nov 16, 2013 9:40 am
Location: bronson mi

420 tracks

Post by bighoss94 » Tue Nov 19, 2013 10:47 pm

New crawler owner jus bought a 420 5 roller tracks have a lot of wear was wondering about finding a spare set and where to look
Thanks
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10947
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Tue Nov 19, 2013 11:15 pm

I can put together a set of 5 roller rails, no pads, new pins and bushings if that is what you are looking for. I also have a set of 5 roller rails, good pins and bushings, short grouser pads as well.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
User avatar
DukeofDeere
1010 crawler
1010 crawler
Posts: 443
Joined: Wed Oct 26, 2011 7:12 am
Location: Hudsonville Michigan

Post by DukeofDeere » Wed Nov 20, 2013 6:28 am

How bad are the track you have?

Duke
Top
bighoss94
MC crawler
MC crawler
Posts: 4
Joined: Sat Nov 16, 2013 9:40 am
Location: bronson mi

Post by bighoss94 » Mon Nov 25, 2013 12:50 am

They r worn quite a bit a few links have been welded and had pins welded in plan to us it for a few light jobs so would like to maybe change them and have a set of spares and wat am I looking at on cost
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 125 guests