jd 1010

1010c · Post by **1010c** » Thu Feb 13, 2014 9:23 pm

Hello everyone I was just wondering when I drive my bull dozer the bottom rollers roll 3 or 4 times than stop than roll again is this normal?

jtrichard · Post by **jtrichard** » Thu Feb 13, 2014 9:53 pm

if the tractor is moving and there is weight on all the rollers then NO its not normal

Tigerhaze · Post by **Tigerhaze** » Fri Feb 14, 2014 1:25 pm

This would be an indication of lack of lubrication in the rollers, causing them to stop rolling. My guess is that the inner roller surfaces are also "flat spotted" which exacerbates the issue.

There is another recent discussion thread you can find about checking rollers in case you don't know the procedure to do so.

1010c · Post by **1010c** » Fri Feb 14, 2014 2:43 pm

Thank you guys I will put more oil in the rollers also you dont think that this is occuring because of track tension? The tracks are with in the old jd specks .

gus · Post by **gus** » Fri Feb 14, 2014 4:01 pm

Frozen grease/oil in the rollers???

gregjo1948 · Post by **gregjo1948** » Sat Feb 15, 2014 6:57 am

TIGERHAZE--exacerbates is a pretty big word for me! Sounds like something I did in private as a teenager.

gregjo1948

Tigerhaze · Post by **Tigerhaze** » Mon Feb 17, 2014 10:22 am

LOL, yeah now looking back at the post it is pretty funny. When I post from work (I'm an engineer) I tend to use words I wouldn't normally use elsewhere.

JDcrawlers Messageboard

jd 1010

jd 1010

1010

Who is online