440 with 2-53 Detroit Diesel
440 with 2-53 Detroit Diesel
Going to tune up a 2-53 Detroit, when you set the injectors do you use the same gauge for the S-35 and N35 injector? Also when you rebuild the 2-53 can anyone show me the engine in a stand. Do you need an adapter?
Should be the same gauge as far as I know.
Studs are likely too short to fit most engine stands, but you could pull them out and put longer ones in for the same of working on it.
Lavoy
Studs are likely too short to fit most engine stands, but you could pull them out and put longer ones in for the same of working on it.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 2010 crawler
- Posts: 622
- Joined: Tue Mar 30, 2010 8:02 am
- Location: Steubenville, OH
I second what Lavoy says. I do know that I have the N series injectors and used the tool that you're talking about for the S series and mine fires up well.
I didn't put mine on a stand because I was afraid a regular stand wouldn't hold that engine, it's heavy.
I put mine on a small cart and that worked pretty well, however I didn't do a full rebuild on it.
I didn't put mine on a stand because I was afraid a regular stand wouldn't hold that engine, it's heavy.
I put mine on a small cart and that worked pretty well, however I didn't do a full rebuild on it.
Ben
Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring
Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring
Who is online
Users browsing this forum: No registered users and 74 guests