1010 question

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
lcfrace
420 crawler
420 crawler
Posts: 41
Joined: Mon Nov 11, 2013 11:31 am
Location: Bloomsburg, Pa 17815
Contact:

1010 question

Post by lcfrace » Sun Mar 23, 2014 7:35 am

I installed a steering clucth in the one side. I jacked it all up so I could test it before installed the track back on. When I put it in gear only the side turn that had the track off. Is this normal? If not what other problem may I have. Thanks Larry
1010 JD Crawler, 310 Case dozer, 977 Case track loader, RayGo roller

User avatar
DukeofDeere
1010 crawler
1010 crawler
Posts: 443
Joined: Wed Oct 26, 2011 7:12 am
Location: Hudsonville Michigan

Post by DukeofDeere » Sun Mar 23, 2014 9:27 am

Other side may need the same rebuild or adjustment.

Duke

User avatar
lcfrace
420 crawler
420 crawler
Posts: 41
Joined: Mon Nov 11, 2013 11:31 am
Location: Bloomsburg, Pa 17815
Contact:

1010

Post by lcfrace » Sun Mar 23, 2014 12:05 pm

Thanks, thats what i thought too.
1010 JD Crawler, 310 Case dozer, 977 Case track loader, RayGo roller

User avatar
wizner85
430 crawler
430 crawler
Posts: 81
Joined: Thu Dec 15, 2011 3:52 pm
Location: Danville PA

Post by wizner85 » Sun Mar 23, 2014 1:00 pm

Did you make the proper adjustments with the throw out bearing, and brake band? I just installed a set of clutches on a 1010 and did the same thing. Wouldn't move because brake band was too tight. Just a thought.

Andrew
440 ICD 64 blade & 8a gear attic winch
440 ICD 831 loader with scarifier and weights
420 62 blade 3pt
Looking for 24 scarifier and 440 log arch

User avatar
lcfrace
420 crawler
420 crawler
Posts: 41
Joined: Mon Nov 11, 2013 11:31 am
Location: Bloomsburg, Pa 17815
Contact:

1010

Post by lcfrace » Sun Mar 23, 2014 4:55 pm

Thanks I loosen the brake band and try it tha way.
1010 JD Crawler, 310 Case dozer, 977 Case track loader, RayGo roller

Post Reply

Who is online

Users browsing this forum: No registered users and 52 guests