update... 420 run problem
-
- 430 crawler
- Posts: 58
- Joined: Wed Sep 11, 2013 9:41 pm
update... 420 run problem
hello all,
just wanted to update you all and thank you for your help finding the problem-s
installed the new intake/exhaust manifold sunday. it runs great!
thanks again.
does anyone have any suggestions for new blade lift cylinders, I see that northern tool has some but don't know what pressure the 420 hyd. manifold builds.
just wanted to update you all and thank you for your help finding the problem-s
installed the new intake/exhaust manifold sunday. it runs great!
thanks again.
does anyone have any suggestions for new blade lift cylinders, I see that northern tool has some but don't know what pressure the 420 hyd. manifold builds.
yard dog
1958 4 Roller 4 speed Holt Blade Holt Winch
420 C
Industrial Yellow
1958 4 Roller 4 speed Holt Blade Holt Winch
420 C
Industrial Yellow
420C runs at about 1000PSI, nothing Northern tool has will be rated anywhere near that low, you will be fine.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 430 crawler
- Posts: 58
- Joined: Wed Sep 11, 2013 9:41 pm
-
- 430 crawler
- Posts: 58
- Joined: Wed Sep 11, 2013 9:41 pm
How about blade arm bushings, the holes in the blade arms are wallered out & the bosses are egg shape. I was thinking of just getting a set of bushings and welding them on and building up weld on the inside, any suggestions?
yard dog
1958 4 Roller 4 speed Holt Blade Holt Winch
420 C
Industrial Yellow
1958 4 Roller 4 speed Holt Blade Holt Winch
420 C
Industrial Yellow
Other option is to bore oversize and bush back down to correct size.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 430 crawler
- Posts: 58
- Joined: Wed Sep 11, 2013 9:41 pm
sounds good,
it took a lot of the red wrench, but I got the two bolts out that hold the holt blade arm to the crossbar. the blade is off and the blade arm boss holes are 2". bushing research time.
would someone tell me if the roller frame cross member bosses that the caps screw down on, to hold the roller frame to the cross member are forged steel or cast?
the reason I am asking is some of the bolts that hold the caps on are looking pretty rotten and I know I will have to bring the heat to get them off, and I don't want to temper the bosses if they are cast.
thank you for all of your help
it took a lot of the red wrench, but I got the two bolts out that hold the holt blade arm to the crossbar. the blade is off and the blade arm boss holes are 2". bushing research time.
would someone tell me if the roller frame cross member bosses that the caps screw down on, to hold the roller frame to the cross member are forged steel or cast?
the reason I am asking is some of the bolts that hold the caps on are looking pretty rotten and I know I will have to bring the heat to get them off, and I don't want to temper the bosses if they are cast.
thank you for all of your help
yard dog
1958 4 Roller 4 speed Holt Blade Holt Winch
420 C
Industrial Yellow
1958 4 Roller 4 speed Holt Blade Holt Winch
420 C
Industrial Yellow
They are cast, but cast steel, heated tons of them over the years, usually only way to get the bolts out.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 430 crawler
- Posts: 58
- Joined: Wed Sep 11, 2013 9:41 pm
Who is online
Users browsing this forum: No registered users and 52 guests