leaking dozer blade cylinde
-
- MC crawler
- Posts: 4
- Joined: Tue May 13, 2014 6:17 pm
leaking dozer blade cylinde
I'm having trouble with the right side hydralic blade lift cylinder on my 52 mc leaking fluis. I took the inside cap off and put a peiceof leather in to tighten it up. It was leaking on the inside and now is leaking out both sides. Any kits made for the lift cylinder? Thanks
-
- MC crawler
- Posts: 4
- Joined: Tue May 13, 2014 6:17 pm
Integral cylinders are all O-rings. Pull the lift shaft and put in all new O-rings and backups, put an extra backup on the inside side of the cylinder. Be careful to get the lift shaft indexed correctly when you put it back together.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- MC crawler
- Posts: 4
- Joined: Tue May 13, 2014 6:17 pm
No problem, glad to hear it.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- MC crawler
- Posts: 4
- Joined: Tue May 13, 2014 6:17 pm
Any good hyd shop should have them along with the O-rings.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 127 guests