Mc hydralic pump

[monzanick]

So I gotta 2 piece pump that I was going to use to for my crawler. Unfortunately I have a 3 piece pump and the fittings are completely different. I removed the 3 piece pump and found the input shaft seal blown out and the bearing rollers falling out when I pulled the seal out.

So all I gotta do is replace the seal and bearing right? I went to my local napa where I got the last seal(napa number NOS 8749). Now napa can't figgure out where to get me another seal even though I gave them Their own part number.... :[

Then I tried to get the bearing.. "that number doesn't cross to anything we can see" ..
Its been 3 weeks now. I guess I can't rely on the kids @ the parts stores any more. Time to get the stuff off the internet.

Anyone need a 2 piece pump? I put a new seal in and some speedy sleeves on the gouged input shaft.

[Tigerhaze]

NAPA has an online system that you can look parts up, if the parts guys at the store are clueless.

[Lavoy]

I stock the bearings, but not the seal.
Lavoy

[jtrichard]

this looks like what your looking for in the seal http://www.ebay.com/itm/SKF-8749-Oil-Se ... 4897.l4275

[monzanick]

NAPA has an online system that you can look parts up, if the parts guys at the store are clueless.

yes they are. I guess those bearings are used in 99-06 harleys for the cams.
I told my buddy with a harley that his bearings will prob last 64 years or so..

[monzanick]

Yup, I finally got the seal, it was $8 at napa. they ate the shipping and markup 'cuz it took so long to get. the bearing is still coming from the almighty intermess... sooon I will have my crawler back into creeping around shape again!

[monzanick]

Got my pump in and it is working great! now to change the oil and I can quit worrying about the hydraulic/engine oil intermix. Not that that was too big a deal(same oil) just my engine oil dipstick is 3 inches overfull!

Next step, replacing the leaking rams...