JD 440 blade

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
fictional31m
420 crawler
420 crawler
Posts: 43
Joined: Wed May 09, 2012 4:48 am

JD 440 blade

Post by fictional31m » Sun Jun 29, 2014 8:40 pm

I'm having trouble tracking down parts for a blade that is identical to this one in the picture
http://www.jdcrawlers.com/messageboard/ ... 4f434e3488

the parts that I need are listed for a 615 on the jd pdf parts however I cant find the parts for the part numbers listed I need the main pivot pin and bushings or is there an alternative repair method you use mine is a little worn and causes the blade to bite/pivot downward when pushing.
Top
User avatar
Gil
1010 crawler
1010 crawler
Posts: 362
Joined: Fri Dec 14, 2007 3:19 pm
Location: Pennsylvania

Post by Gil » Wed Jul 02, 2014 7:09 pm

Lavoy can correct me if I am wrong, but I believe his blade shown in the pictures you referenced, is a Model 64. The parts manual is available on the John Deere website. Gil
JD440-ICD loader; JD440-IC bulldozer; JD440-ICD backhoe; JD440-I backhoe; JD440-I tractor; + five recumbent JD440-ICs
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10945
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Wed Jul 02, 2014 8:22 pm

Correct, if you have a power 6 way on a 440, it is a #64.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 84 guests