Will 1010 crawler parts fit a 440ic

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
melbowc
MC crawler
MC crawler
Posts: 4
Joined: Wed Jul 03, 2013 1:35 pm
Location: Arkansas

Will 1010 crawler parts fit a 440ic

Post by melbowc » Wed Aug 06, 2014 8:45 pm

Hello everyone,

Will parts from a 1010c diesel fit a 440ic gas ie. track adjuster, cylinders etc.? I have a 1010 with a cracked block and I found a 440ic pretty cheap and was just wondering if I could use any of the parts from the 1010 on the 440 before I purchased the 440. Thanks for any info.
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10943
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Thu Aug 07, 2014 1:16 pm

Tracks will fit, adjusters will fit, sprockets might fit, bottom rollers and idler will, that is about the extent.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
User avatar
pop pop
1010 crawler
1010 crawler
Posts: 490
Joined: Thu Aug 27, 2009 12:07 am
Location: chandler, arizona

Post by pop pop » Tue Aug 26, 2014 5:42 pm

hey melbow, buy it and whatever you dont use, sell it to us.
440icd/602/8a,,440icd/831/ripper,,440icd/831/3pt.,misc. 440 parts, i have 5 of these now, but i can stop anytime :cry:
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 28 guests