Looking for info about this track pad.

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
mapaduke@yahoo.com
1010 crawler
1010 crawler
Posts: 420
Joined: Sun Sep 13, 2009 6:27 pm
Location: Rochester N.H.

Looking for info about this track pad.

Post by mapaduke@yahoo.com » Tue Jun 02, 2015 2:42 pm

Image

I know its for snow and they are off a 52 MC. what I don't know is if they were used on the Lindeman or early 40? I have searched the internet and haven't seen another set like these with the raised center section around the hole. Are they rare?
Thanks Ron
nothing crawles like a deere

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10409
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Wed Jun 03, 2015 9:12 pm

Snow pad for lineman and mc, never used on a 40. They are listed in the MC parts catalog. Got a set on an MC in the set.
lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
mapaduke@yahoo.com
1010 crawler
1010 crawler
Posts: 420
Joined: Sun Sep 13, 2009 6:27 pm
Location: Rochester N.H.

Post by mapaduke@yahoo.com » Thu Jun 04, 2015 3:30 am

Ok, so the early 40 never had the stamped pad right?
Just curious if anyone else has these on there MC.
nothing crawles like a deere

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2794
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Post by Stan Disbrow » Thu Jun 04, 2015 4:55 am

Hi,

IIRC, the Lindemann style pads changed over for the last year of MC production. But it may have been earlier.

Stan
There's No Such Thing As A Cheap Crawler!

Have: '58 JD 420c 5-roller w/62 inside manual blade
Have: '78 JD350C w/6310 outside manual blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Also Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

User avatar
mapaduke@yahoo.com
1010 crawler
1010 crawler
Posts: 420
Joined: Sun Sep 13, 2009 6:27 pm
Location: Rochester N.H.

Post by mapaduke@yahoo.com » Thu Jun 04, 2015 5:01 am

Ok, so a 52 mc could have come with the forged or cast pads?
nothing crawles like a deere

User avatar
Stan Disbrow
350 crawler
350 crawler
Posts: 2794
Joined: Fri Jul 15, 2005 3:13 pm
Location: Raleigh, NC

Post by Stan Disbrow » Thu Jun 04, 2015 7:48 am

Hi,

This is what I recall. Unfortunately, I have not the parts catalog for the MC, which would show the changeover serial number. From that, one could go to the FAQ on this site and figure out which year the changeover occurred...

I can say that I have seen more MCs with the later pads than the earlier ones. I often wonder if the pads wound up changed by owners back in the day, though.

Stan
There's No Such Thing As A Cheap Crawler!

Have: '58 JD 420c 5-roller w/62 inside manual blade
Have: '78 JD350C w/6310 outside manual blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Also Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10409
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Sat Jun 06, 2015 4:30 pm

Very late in MC production, somewhere in the 19,XXX serial number range if I remember correctly they changed to the 40, 420, etc pads.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Steven Walters
440 crawler
440 crawler
Posts: 111
Joined: Sun Jul 22, 2007 5:27 am
Location: Hopewell NJ

Post by Steven Walters » Sun Jun 07, 2015 10:39 am

I have a wide Lindeman with that style pad on it,

Howard Yoder
1010 crawler
1010 crawler
Posts: 353
Joined: Mon Apr 04, 2005 6:53 pm
Location: Columbus Ohio

Post by Howard Yoder » Sun Jun 07, 2015 12:06 pm

Does anybody have any of those for sale

Post Reply

Who is online

Users browsing this forum: No registered users and 35 guests