Hydraulics for a plow- John Deere MC

[catmatt]

Looking to get a #44 JD plow for my MC crawler. The plow is hydraulic, however my MC only has the tool carrier hydraulics between the tracks. Can I splice into the hydraulic lines easly to make this work? Thanks

[Lavoy]

You can, but unless you have shut off valves to the integral cylinders, they will still operate as you are trying to control the plow as well.
Lavoy

[FarmLife]

you could tap into the pressure feed line and plumb in another valve going to a set of remotes on the back of the crawler.

But like Lavoy said, a set of shut-off valves on the tool carrier cylinders would be a less expensive way to go.