1959 440 john deere 2-53 detroit.. absolutely everything gone through top to bottom.. the only thing left to finish it is the hydraulics, pump, valve, lines, and paint.. $4900
nels 218-689-3222
440 crawler for sale
- Stan Disbrow
- 350 crawler
- Posts: 2904
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Hi,
A few questions about it:
Does it have a manual blade or a PAT blade or a loader or is it a bare crawler? Does it have anything on the rear like a winch or 3-pt hitch? Finally, where is it located?
Later!
Stan
A few questions about it:
Does it have a manual blade or a PAT blade or a loader or is it a bare crawler? Does it have anything on the rear like a winch or 3-pt hitch? Finally, where is it located?
Later!
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
- JD440ICD2006
- 350 crawler
- Posts: 1113
- Joined: Tue Aug 22, 2006 3:57 pm
- Location: South Carolina
In other words, can a person buy it and sell off a few high dollar items to help pay for ? LOL
1959 JD 440ICD w/64 Power Angle Tilt Blade
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
hello
its a manual blade side to side, i forgot the number of the blade but i think they call it a 602, it attaches to the outside of the tracks. i have a spare 2-53, a spare blade, and a bunch of other misc. stuff from a parts crawler..
Were located in Park Rapids Minnesota.
thanks,
nels
Were located in Park Rapids Minnesota.
thanks,
nels
When the ad was first listed I went to my source, http://www.melissadata.com/keywordsearch/areacode.htm and found that the number listed 218-689-xxxx was a cell phone out of Thief River Falls, MN and figured it was too far to consider hauling to Texas. That cleared my interest in a hurry.
Bryce
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
- Stan Disbrow
- 350 crawler
- Posts: 2904
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Hi,
Hmmm. Hadn't thought about that. Personally, I want to use stuff, not tear it down and sell it off.
I'd love to have a 64 blade on my 420c instead of the 62, but know it won't work of course. A 440 with a 64 would fit the bill. I'd also love to have a scarifier on the back, and a 3-pt makes that pretty easy. There are other ways of adding one to a 440 that don't work well on the 420 with the lighter finals.
I've been looking at JD450's as of late. Not too many 440's around any more, so I thought I'd ask. In reality, it's too far for me to go get it even if it happend to have a 64 on it.
There is a 440 with 64 here in NC on eBay, but one would really have to consider that one as a total restoration project, I think. This one sounds like it's almost ready to go to work again.
Later!
Stan
Hmmm. Hadn't thought about that. Personally, I want to use stuff, not tear it down and sell it off.
I'd love to have a 64 blade on my 420c instead of the 62, but know it won't work of course. A 440 with a 64 would fit the bill. I'd also love to have a scarifier on the back, and a 3-pt makes that pretty easy. There are other ways of adding one to a 440 that don't work well on the 420 with the lighter finals.
I've been looking at JD450's as of late. Not too many 440's around any more, so I thought I'd ask. In reality, it's too far for me to go get it even if it happend to have a 64 on it.
There is a 440 with 64 here in NC on eBay, but one would really have to consider that one as a total restoration project, I think. This one sounds like it's almost ready to go to work again.
Later!
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (now known as 5045D)
Who is online
Users browsing this forum: No registered users and 13 guests