........A standard hand operated grease gun doesn't budge em ! Any ideas for a simple remedee ? ?
Thanks .............Sandman92284
1010 C .........Stuck track adjuster/s
- sandman92284
- 40C crawler
- Posts: 16
- Joined: Sat Nov 15, 2008 12:01 pm
- Location: Yucca Valley CA
I'm not sure where your adjusters are stuck in relation to the travel on the trackframe, but if not fully retracted you may be able to push on the front idler with another piece of equipment to get them to budge first and then see if grease gun will work. You need to be sure that the plug is removed to allow grease to escape and be very careful pushing on the idler so you don't damage something. I got one of my adjusters on my 2010 to unfreeze by doing this.
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
- Paul Buhler
- 350 crawler
- Posts: 991
- Joined: Wed May 21, 2008 6:25 pm
- Location: Killington, VT
Track adjustment.
Have you swapped out the grease fitting? Sometimes the problem is there. Paul
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
- sandman92284
- 40C crawler
- Posts: 16
- Joined: Sat Nov 15, 2008 12:01 pm
- Location: Yucca Valley CA
Stuck track adjuster/s
To all the guys that responded to my question,"easy fixes for stuck adjusters " ! A big THANKYOU !
I'm going to try all of your suggestions, , , ,I'll let you guys know witch one does the trick !
P.S I'm new to "JD Crawlers Message Board" , I accidentally duplicated my question ! Please disregard !
Thank You ,Dennis Brown
Yucca Valley CA
I'm going to try all of your suggestions, , , ,I'll let you guys know witch one does the trick !
P.S I'm new to "JD Crawlers Message Board" , I accidentally duplicated my question ! Please disregard !
Thank You ,Dennis Brown
Yucca Valley CA
Who is online
Users browsing this forum: No registered users and 18 guests