350B Steering Clutch specifications?

Post support questions about your JD350 and newer crawler here
Post Reply
GlennP
40C crawler
40C crawler
Posts: 14
Joined: Wed Apr 21, 2010 6:43 pm
Location: Newfoundland

350B Steering Clutch specifications?

Post by GlennP » Thu Apr 22, 2010 5:20 pm

I bought a 350B crawler loader last year and the steering clutch on the left side is bad. The previous owner gave me a few boxes of parts which includes two packages of fibre steering clutch disks (T20790). I have no idea if they are new or worn out. They look to be in good shape but wonder how you tell if they are worn. The thickness of every disk (2 sets of 8) is exactly 4mm. Is this within the specification or are they worn out? I am about to start the repalcement of the clutch disks and don't want to use worn parts. Thanks!
1970 350B Crawler Loader
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Fri Apr 23, 2010 6:46 am

I believe they are .155, but not at home right now so can't check..
Lavoy
Top
GlennP
40C crawler
40C crawler
Posts: 14
Joined: Wed Apr 21, 2010 6:43 pm
Location: Newfoundland

Post by GlennP » Fri Apr 23, 2010 7:57 am

Would .155 be the lower limit (worn out)? How thick is a new disk? Thanks!
1970 350B Crawler Loader
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Fri Apr 23, 2010 7:53 pm

New is .155 or up, worn is .151 I think.
lavoy
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 5 guests