1956 420c for trade

Willyr · Post by **Willyr** » Fri Jan 20, 2012 5:49 pm

1956 JD 420c for sale or trade. It has a 6 way blade. The right hand side does not turn as easily as the left. The adjustment for both sides on the brakes is maxed out. I have the materials for the brakes and the rivets, I just dont want to do the job. LOL (I have done it before)

The pins and bushings have minimal wear on them, maybe a eigth of an inch into the bushing. Engine runs strong and it will work if you want it to. There is a sand pit next door if you want to try it out. Every one needs a sand pile to play in, grin.

What I would like to find is a rubber tired tractor that I can use for a people mover during the fairs or something near equivelant value. I would like to sell this at the appraised value of $4500 (or trade).

Willyr · Post by **Willyr** » Sun Jan 29, 2012 9:37 am

deleted info

Willyr · Post by **Willyr** » Wed Feb 01, 2012 9:10 pm

deleted info

Willyr · Post by **Willyr** » Thu Feb 02, 2012 11:57 am

Well I had a nibble today for a 520? Can anyone give me details (size weight) on a 520?

oldtanker · Post by **oldtanker** » Thu Feb 02, 2012 3:47 pm

Try here for 520 info.

http://www.tractordata.com/farm-tractor ... e-520.html

Rick

Post by **Lavoy** » Sat Feb 04, 2012 10:15 am

520 will run up to and maybe over 6,000 lbs depending on equipment and weights/weighting. The 520 replaced the 50, which replaced the B. I think they are in the 35HP range, but don't quote me. Overall length again can vary, but in the neighborhood of 12'.
Lavoy

Willyr · Post by **Willyr** » Sat Feb 04, 2012 12:14 pm

I am really surprised no one on this board cares for this deal. Sigh oh well.

steamfitter99 · Post by **steamfitter99** » Sun Feb 05, 2012 9:23 pm

I'm interested, but Maine is just a little too far. I have my eye on 2 in Wisconsin right now. I think it would be a good deal. Tom.

Willyr · Post by **Willyr** » Fri Feb 17, 2012 8:47 am

So some one from this board contacted me yesterday, he told the fellow that I was going to do the trade with that my tractor needed pins and bushings. Upon his thoughts he said it was a two thousand dollars for clutch repair.

Granted it needs steering brakes, sure it would be a good idea to replace the clutches at the same time. Yet "Eric" told him he would have to spend more than the cost of the tractor to do this.

I saw a sign in Radio Shack that is most fitting. Samson slew a thousand Philistines with the jawbone of an ass. The same weapon was used by some one yesterday that killed the trade for the tractor. Grrrrr.

Eric.MacLeod · Post by **Eric.MacLeod** » Sat Feb 18, 2012 9:07 pm

hello willyr, i hope someone isnt using my name to bad mouth your dozer. you can buy both sides to redo the brakes and clutches for about a 1000$. and i dont know how someone that has never seen your dozer can assume that the pins and bushings would be gone. i know the economy is bad but i would think someone would jump at that deal.uncle henrys or craigslist has alot of views each week.good luck..Eric.

Willyr · Post by **Willyr** » Sat Feb 18, 2012 9:36 pm

Apology accepted.

Willyr · Post by **Willyr** » Sun Feb 19, 2012 4:25 pm

delivery is possible after purchase

I would need to be compensated for diesel and tolls if incurred.

Willyr · Post by **Willyr** » Wed Mar 07, 2012 7:58 pm

Ok, so I found a JD B. Alas he wont trade, he will if I sell mine take cash. So, if anyone wants, my tractor at 3k

Willyr · Post by **Willyr** » Sat Mar 10, 2012 3:50 pm

Lavoy or any moderator, please delete this thread. I have traded for a John Deere 60

JDcrawlers Messageboard

1956 420c for trade

1956 420c for trade

crawler for sale

Who is online