Post support questions about your JD350 and newer crawler here
-
gcgrant
- 430 crawler
![430 crawler 430 crawler](./images/ranks/wrench/spanner_rank_1.gif)
- Posts: 50
- Joined: Wed Aug 30, 2006 11:40 pm
- Location: Kamloops BC
Post
by gcgrant » Sun Mar 18, 2012 8:51 pm
The left track on my 350 has gotten quite slack and I have'nt been able to get the adjuster to move with a grease gun. I was putting quite a bit of pressure on it and was afraid of blowing seals.
I thought about using the hydraulics on the six way blade to assist in breaking the sticky adjuster loose. I put a chain around the adjuster and attached it out to the corner of the blade and used the blade angle hydraulics to put tension on the adjuster while I applied pressure with the grease gun.
Right away the grease started to go in and I now have a functioning adjuster!
GCGrant
![Very Happy :D](./images/smilies/icon_biggrin.gif)
-
LeonardL
- 350 crawler
![350 crawler 350 crawler](./images/ranks/wrench/spanner_rank_5.gif)
- Posts: 869
- Joined: Thu Oct 06, 2011 7:11 pm
- Location: Missouri
Post
by LeonardL » Mon Mar 19, 2012 6:18 am
Jolly Good!!!!!
![Very Happy :D](./images/smilies/icon_biggrin.gif)
40 plus years working on JD 350s, 400Gs, 450s and other equipment both Ag and Construction.
Who is online
Users browsing this forum: Google [Bot] and 95 guests