Whats it going to cost me?

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
MY JD 40C
MC crawler
MC crawler
Posts: 7
Joined: Wed Apr 04, 2012 5:09 pm
Location: UPSTATE NY

Whats it going to cost me?

Post by MY JD 40C » Sun Apr 08, 2012 7:56 am

Hi all i'm new here and i have a few things to ask you guy's.I have a jd 40c crawler not sure what year it is but i need to rebuild the steering clutches on both sides . How much is it going to cost for all the disks and presure plates for both sides? . Also looking for parts for this awesome little dozer it needs some tlc . Thank you mark.

User avatar
JD440ICD2006
350 crawler
350 crawler
Posts: 1113
Joined: Tue Aug 22, 2006 3:57 pm
Location: South Carolina

Post by JD440ICD2006 » Sun Apr 08, 2012 9:12 am

Mark,

Welcome to the best Internet site for JD crawler information and parts.
Lavoy Wilcox, owner of this site, has the steering clutch parts and advice that you need.
1959 JD 440ICD w/64 Power Angle Tilt Blade
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)

MY JD 40C
MC crawler
MC crawler
Posts: 7
Joined: Wed Apr 04, 2012 5:09 pm
Location: UPSTATE NY

Post by MY JD 40C » Sun Apr 08, 2012 10:00 am

JD440ICD2006 wrote:Mark,

Welcome to the best Internet site for JD crawler information and parts.
Lavoy Wilcox, owner of this site, has the steering clutch parts and advice that you need.
Thank you i sent him a pm have a happy easter mark.

User avatar
Willyr
2010 crawler
2010 crawler
Posts: 695
Joined: Sat Jul 17, 2010 3:03 am
Location: Downeast Maine (North of Ellsworth)

Post by Willyr » Sun Apr 08, 2012 10:08 am

Full blown rebuild could run about 500 a side.
former owner of a 1956 420c
All help is greatly appreciated.

Proud owner of a project 1952 JD 60

http://www.youtube.com/watch?v=nFehqXVd9z4

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests