420 crawler fresh in for parts
420 crawler fresh in for parts
Just got in a 420 crawler for parts. Several of you have been asking for some parts I was out of, but now I have them in stock.
The crawler is a 1957 5 roller, 5 speed crawler. Appears to have 10 recent rollers under it, so I now have rollers in stock again. Crawler has excellent fenders, and new repro battery sheetmetal on it. Hood is good, grille is junk.
10" track pads on decent rails, but pins and bushings worn. Engine runs good, will be out of the crawler by next week.
I also got a set of counterweight brackets and a full weight set, I know someone had contacted me about weights in the past, but I was out.
Anything you need, call or e-mail, and I will check on it.
Lavoy
The crawler is a 1957 5 roller, 5 speed crawler. Appears to have 10 recent rollers under it, so I now have rollers in stock again. Crawler has excellent fenders, and new repro battery sheetmetal on it. Hood is good, grille is junk.
10" track pads on decent rails, but pins and bushings worn. Engine runs good, will be out of the crawler by next week.
I also got a set of counterweight brackets and a full weight set, I know someone had contacted me about weights in the past, but I was out.
Anything you need, call or e-mail, and I will check on it.
Lavoy
-
- 440 crawler
- Posts: 115
- Joined: Sun Jul 22, 2007 5:27 am
- Location: Hopewell NJ
parts
I'll take the fenders and hood.
Replied to your PM a little bit ago.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Got the crawler mostly down last night.
All 10 bottom rollers have been replaced and are like new. Sprockets are decent, no where near new, but would run a long time. Front idlers, brackets and springs are good, bushings and shafts appear to be worn. Final cases are good, and are the later style case with the bump on the pinion shaft area.
Battery sheetmetal is new, and recently installed. Has new seat cushions, seat frame is pretty good, base is perfect, slide is garbage.
Thanks for all the inquiries, I will respond to e-mails and PM's as I get farther into the crawler.
Lavoy
All 10 bottom rollers have been replaced and are like new. Sprockets are decent, no where near new, but would run a long time. Front idlers, brackets and springs are good, bushings and shafts appear to be worn. Final cases are good, and are the later style case with the bump on the pinion shaft area.
Battery sheetmetal is new, and recently installed. Has new seat cushions, seat frame is pretty good, base is perfect, slide is garbage.
Thanks for all the inquiries, I will respond to e-mails and PM's as I get farther into the crawler.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Fenders are sold, thanks.
The engine is now available again, buyer decided to try and rebuild his own instead, so no longer wants it.
Lavoy
The engine is now available again, buyer decided to try and rebuild his own instead, so no longer wants it.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Trackframes, rollers and rockguards sold, thanks.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- jdcollector
- 430 crawler
- Posts: 72
- Joined: Sun Jun 28, 2009 8:34 pm
- Location: College Station, Texas
Fenders are sold, no hyd on this crawler, sorry.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- jdcollector
- 430 crawler
- Posts: 72
- Joined: Sun Jun 28, 2009 8:34 pm
- Location: College Station, Texas
Randy,
Need to know 4 or 5 speed, and serial number. Shoot me an e-mail with the details and I will check.
Lavoy
Need to know 4 or 5 speed, and serial number. Shoot me an e-mail with the details and I will check.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
JD440 transmission
Lavoy,
I need a transmission for 440 gasser, preferably 5-speed with reverser.
I need a transmission for 440 gasser, preferably 5-speed with reverser.
What serial number or is it large or small transmission?
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 5 guests