440 icd track adjusting
440 icd track adjusting
How do tighting the tracks on 440 icd loader dozer
Thanks
Thanks
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
440icd track adjusting
I think on a 440 loader it will have hydraulic adjusters. Right behind your front idler, there is a special grease fitting that you pump grease into to push the idler ahead, tightning the track. You need a special tip for your grease gun to utilize the fitting on the adjuster. I think you can remove that fitting and install a regular fitting to do the adjusting. gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
-
- 2010 crawler
- Posts: 622
- Joined: Tue Mar 30, 2010 8:02 am
- Location: Steubenville, OH
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
440 icd track adjusting
Ben-- I thought the threaded shaft adjusters were on the 4 roller machines and if it's a loader, it probably is a 5 roller. I MIGHT BE WRONG! gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
Hyd adjusters were an option, mechanical were standard.
No 4 roller 440's.
Lavoy
No 4 roller 440's.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
440 icd track adjusting
Thanks Lavoy-- Didn't know there weren't any 4 roller 440's. I talked to guy today that said he has a 4 roller 1010, and it has the mechanical tensioners. Didn't know they made 4 roller 1010's and that they still used the threaded tensioners on the 1010's. I guess I had a good day: I learned stuff. gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
- DukeofDeere
- 1010 crawler
- Posts: 443
- Joined: Wed Oct 26, 2011 7:12 am
- Location: Hudsonville Michigan
they still used threaded tensioners on 2010 also but not very many i have only seen 2 or 3... on the 4 roller 1010 they did not use upper idler
Last edited by jtrichard on Sat Mar 09, 2013 10:01 pm, edited 2 times in total.
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
- mapaduke@yahoo.com
- 1010 crawler
- Posts: 420
- Joined: Sun Sep 13, 2009 6:27 pm
- Location: Rochester N.H.
look at 1010 parts book shows some had 4 roller and no upper idler and track was 32 link... 36 link on 5 roller model.... 350 also used both 4 and 5 roller as per parts book also it appears the 4 roller did not have upper idler and was 32 link and 36 link
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
- gregjo1948
- 350 crawler
- Posts: 1000
- Joined: Mon Aug 30, 2010 5:58 am
- Location: Newark Valley,NY,USA
440 icd track adjusting
Will the threaded adjuster off a 1010 work on a 440 with hydraulic adjusters? gregjo1948
JD 350B diesel 6way blade, Case 580B Loader/backhoe, Farmall 504 high crop w/ flail boom mower, International 404 , International 284 diesel w/belly mower, 1972 Ford F600 dump truck, Galion 3-5 roller, Allis Chalmers D17, 1620 Ford
Who is online
Users browsing this forum: No registered users and 31 guests