Hydraulic Pump
Hydraulic Pump
Well, the hydraulic shop evaluated the pump from my 440 loader and it's shot so I need a replacement. Of course the six spline shaft has long been replaced and the mount does not appear to accommodate modern designs. Before I go and order a new pump and have another mount machined to hold the gal on the machine, I would like to know what my options are, if I have any, with using the old mount and buying a new pump. If you could provide me the brand and model #'s I would be most appreciative. Some of the dated posts refer to Cessna pumps and such but I can't find those on current listings. Anyway, I need help.
Wally
-
- 2010 crawler
- Posts: 622
- Joined: Tue Mar 30, 2010 8:02 am
- Location: Steubenville, OH
Wall E, If you can track down an original pump mounting plate it might make your search easier. The Cessna pump uses a standard 2 bolt A or B face ( I can't remember which), so any other pump you buy should bolt right to the factory JD mounting plate.
You can also use a Hydreco pump, which has a different mounting face, but is a bigger pump which is probably what you need if you have a loader.
I should specify that those pumps are for a 440ICD. The gas motor has a different pump I believe and mounted in a different location on the motor.
You can also use a Hydreco pump, which has a different mounting face, but is a bigger pump which is probably what you need if you have a loader.
I should specify that those pumps are for a 440ICD. The gas motor has a different pump I believe and mounted in a different location on the motor.
Ben
Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring
Great Grandpa's 1960 440ICD 602 blade
Between SN's: 455,633 - 456,801
Currently Rebuilding/Restoring
-
- 1010 crawler
- Posts: 353
- Joined: Mon Apr 04, 2005 6:53 pm
- Location: Columbus Ohio
Who is online
Users browsing this forum: No registered users and 88 guests