Canopy and/or winch off of 440 crawler for sale
Canopy and/or winch off of 440 crawler for sale
For Sale: Canopy and/or winch off of the 440 crawler I just brought home. The canopy is off of a 1010 or 350, but very professional job of adapting to fit a 440, not a single butcher job required to mount.
The winch appears to be a late model Ramsey or Warn PTO drive winch like used on Army jeep or tow truck type application. In this application, they were driving it with a sprocket and chain off of the PTO shaft. In a vehicle application, they drove directly off of the trans or tranfer case PTO.
I can palletize and ship pretty much anywhere in the continental US.
I will have more pics shortly, but check the pics in the show and tell section under "My new toy" for now.
Lavoy
The winch appears to be a late model Ramsey or Warn PTO drive winch like used on Army jeep or tow truck type application. In this application, they were driving it with a sprocket and chain off of the PTO shaft. In a vehicle application, they drove directly off of the trans or tranfer case PTO.
I can palletize and ship pretty much anywhere in the continental US.
I will have more pics shortly, but check the pics in the show and tell section under "My new toy" for now.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Here is a pic of the canopy and winch installed on the crawler.
Lavoy


Lavoy


Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
- Paul Koski
- 420 crawler
- Posts: 26
- Joined: Tue Jan 22, 2013 8:48 pm
- Location: Ewen, Michigan
Re: Canopy and/or winch off of 440 crawler for sale
How much were you asking for the winch, would need a PTO shaft assembly also to run the winch.Lavoy wrote:For Sale: Canopy and/or winch off of the 440 crawler I just brought home. The canopy is off of a 1010 or 350, but very professional job of adapting to fit a 440, not a single butcher job required to mount.
The winch appears to be a late model Ramsey or Warn PTO drive winch like used on Army jeep or tow truck type application. In this application, they were driving it with a sprocket and chain off of the PTO shaft. In a vehicle application, they drove directly off of the trans or tranfer case PTO.
I can palletize and ship pretty much anywhere in the continental US.
I will have more pics shortly, but check the pics in the show and tell section under "My new toy" for now.
Lavoy
Give a man a fish and he will work another day, teach a man to fish and he may never work again!
$500, yes you would need the PTO as well.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 420 crawler
- Posts: 41
- Joined: Mon Nov 18, 2013 11:50 am
- Location: Tennessee
Winch
Is the winch still available? I've got a 53 model 40c and I can't find any of the gearmatic 8a's or that type so I've been thinking of trying this type of setup. Will this work on 40c? And also, what are the pros and cons of this type setup? Is it any more rough on the pto etc? New to this world so any help or suggestions would be great. Thanks for your time
Got wood??
Yes it is available, yes it will work on a 40, may require some changes to mounting setup, but it is all standard metal shapes and sizes.
It will put some side load on the PTO, but this is the same way some of the aftermarket winches were driven in the first place.
Lavoy
It will put some side load on the PTO, but this is the same way some of the aftermarket winches were driven in the first place.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 420 crawler
- Posts: 41
- Joined: Mon Nov 18, 2013 11:50 am
- Location: Tennessee
Not sure, usually I have seen that size of winch rated in the 8,000 to 12,000 range.
Hard to guess on shipping, but off the cuff, $250-$350.
Lavoy
Hard to guess on shipping, but off the cuff, $250-$350.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
-
- 420 crawler
- Posts: 41
- Joined: Mon Nov 18, 2013 11:50 am
- Location: Tennessee
Great to hear. Seems like that'll save me some time and money in comparison to building my own rig like it from scratch. My 40c is a good candidate for this setup, it already has pto shaft and a drawbar.
I'll let you know as soon as I've got the money together and we'll proceed to the next step. Thanks a ton.
I'll let you know as soon as I've got the money together and we'll proceed to the next step. Thanks a ton.
Got wood??
Who is online
Users browsing this forum: No registered users and 0 guests